GLYSANTIN Engine coolants / GLYSACORR Engine coolants / HYDRAULAN Brake Fluids
Intelligent Solutions
Protection against corrosion, overheating,freezing and cavitation
■ Leading supplier of highly effective engine coolants
■ Comprehensive product approvals from major vehicle manufacturers
■ Focus on product development for new engine technologies such as fuel cells
■ Cooperative product development with leading automotive OEMs
BASF Product Portfolio
Silicate-Type Hybrid Coolant
■ Balanced combination of inorganic and organic corrosion inhibitors for high dependability.
■ Silicates quickly build a stable and thin protective layer – that protect surfaces of the cooling system against corrosion, cavitation and deposition.
■ Nitrite-containing coolant (GLYSANTIN® G05®) protects cast iron engines (Heavy Duty).
■ Nitrite-free coolant (GLYSANTIN® G48®) also protects engines with higher amounts of aluminum.
■ Good long term experience with many automotive manufacturers.
BASF Product Portfolio
OAT Coolants (Organic Acid Technology)
■ In the middle of the 90´s the first silicate-free engine coolants introduced to the market by VW.
■ Only organic corrosion inhibitors with very low depletion rates ensure an extended coolant life.
■ Aluminum surfaces become darkly stained because they first oxidize and are then protected by the organic acid salts (chemical adsorption) à The oxidation is intended.
■ This technology also shows high dependability like hybrid coolants.
· GLYSANTIN® G34®
BASF Product Portfolio
Si-OAT Coolants (Silicate and Organic Acid Technology)
■ Combines the advantages of both OAT and Hybrid coolant.
■ Organic additives with low depletion rates are the backbone of the inhibitor package.
■ Silicates form a protective layer faster, especially on aluminum, without visibly changing the surface (physical adsorption).
■ VW Customer specific modification: GLYSANTIN® GG40® A proportion of the MEG is replaced by the renewable raw material Glycerin.
· GLYSANTIN® GG40®
BASF Product Portfolio
P-OAT Coolants (Phosphate and Organic Acid Technology)
■ Contains phosphate for aluminum protection
■ Designed to work at lower MEG concentrations, e.g. 30 vol. %
■ Danger of hard water scale minimized by use of additives
· GLYSANTIN® G69®
· GLYSANTIN® G70
BASF Product Portfolio
PSi-OAT Coolants (Phosphate and Silicate with Organic Acid Technology)
■ OAT technology combined with both silicate and phosphate
■ Developed to meet the requirements of modern downsized engines
■ Protective layer are formed rapidly
■ Excellent protection against cavitation
■ Improved tolerance for flux-brazed aluminium heat exchangers
Coolant for future mobility concepts
Did you know..?
… that a Tesla Model S needs approx.
This is approx. 3 times as much coolant as in a cooling system of a conventional combustion engine.
BASF Product Portfolio
Hot Test Coolant
■ Passenger cars and heavy duty engines are mostly hot tested for full functionality before shipping: The hot test fluid is drained and the engine sealed for transport.
■ Unique blend of vapor phase corrosion inhibitors which prevents corrosion.
■ After the hot test: The remaining quantity of the hot test coolant will protect the engine’s cooling system up to 6 months against corrosion.
· GLYSACORR® P113
BASF commitment to Quality Management
■ ISO 9001 (Quality Management System)
■ ISO 14001 / EMAS (Environmental Management Systems)
■ ISO 50001 (Energy Management System)
■ IATF 16949 (ISO technical specification: Quality Management System)
■ ISO 17025 (Testing and Calibration Laboratories)
Intelligent Solutions
Premium Quality – Premium Safety
■ Research and development
• Close partnership with leading motor vehicle manufacturers and brake system suppliers to be able to satisfy the most stringent safety requirements and customer needs.
■ Use in motor vehicles
• Officially approved for use in a number of popular cars
• BASF is an original equipment supplier to many motor vehicle manufacturers
• Fleet tested under extreme conditions and exceed the requirements of international standards.
■ Production and logistics
• We work with a state of the art quality management system and check every step of the process.
Basics
Performance Requirements of Brake Fluids
■ Ability to absorb water without significant loss of performance
■ High boiling points and high vapor lock values to avoid failure of brake system
■ Corrosion protection for all metal components
■ Compatibility with rubbers and elastomers (cups, flexible hoses)
■ Little foaming tendency
■ Excellent lubricating properties
■ Low viscosity at low temperatures for faster response time and higher safety in vehicles equipped with ESP®-systems
Use in Motor Vehicles
HYDRAULAN® – The Brake Fluid with built-in Safety features
Potential dangers
Due to a poor brake fluid
· Vapour lock
· Delayed brake response
· Corrosion
· Friction and abrasion
· Defective seals, leakage
HYDRAULAN®
Has the safety features you need
· High boiling point
· Low viscosity at icy temperatures
· Outstanding corrosion protection
· Excellent lubrication
· Compatibility with a wide range of elastomers
· Optimum thermal stability
· Excellent low-temperature stability
Low Viscosity Fluids
■ Extremely suitable for auxiliary equipment ESP® because of its outstanding low temperature viscosity.
■ Overcomes the “brake fluid paradigm”: Combines low viscosity and high wet boiling point.
■ Approved by the following OEMs: Audi,BENTLEY,BMW,BUGATTI,GM,VW,Ford,OPEL,SEAT,SKODA,Lamborghini
Low Viscosity Fluids
■ Extremely suitable for modern “automated” brake systems because of its outstanding lubricity.
■ Due to its unique properties it extends the “brake fluid paradigm”: Simultaneously fulfilling the requirements of DOT 3, DOT 4 and DOT 5,1 brake fluids.
■ Approved by both car manufacturers and brake system suppliers
• Volvo Cars
• Bosch
